Here you can see the grades of the Piping MATERIAL we are regularly stocking.
You can go to the page, <STOCK MATERIAL & RFQ>, by clicking on your ALLOY on the table below.
CLICK ON YOUR GRADE
|
CLICK FOR RFQ. min. 99.0%Ni, Max. 0.35%Mn, Max. 0.4%Fe, general applications : synthetic fibers and alkalies, corrosion-resistant equipment such as caustic evaporators, in spun anodes, combustion boats, laboratory crucibles, and electronic components
NICKEL 200UNS N02200 |
CLICK FOR RFQ. 32%Ni, 19Cr, 2Mo, Fe(bal), general application : Heat exchangers, Bubble caps, Process piping, Mixing tanks, Chemical and petroleum process equipment.
ALLOY 20UNS N08020 |
CLICK FOR RFQ. Ni(Bal), 14.5~16.5%Cr, 15.0~17.0Mo, 4~7%Fe, 3.0~4.5%W, general applications : air pollution control, waste treatment, stack liners, ducts, dampers, scrubbers, stack-gas re-heaters, fans, pulp and paper production, chemical processing, heat exchangers, reaction vessels, evaporators, transfer piping.
HASTELLOY C276UNS N10276 |
CLICK FOR RFQ. 63~70%Ni, 28~34%Cu, 2%Mn, 2.5%Fe, general applications : Crude oil distillation towers, Ethyl chloride purification, Marine components, Oil well recovery pumps, Salt production, HF alkylation, HF reboilers
MONEL 400UNS N04400 |
CLICK FOR RFQ. Min. 72%Ni, 14~17%Cr, 1%Mn, 6~10%Fe, general applications : heaters, Phenol condensers, evaporator tubes, tube sheets and flaking trays, Barge and tank truck liners, Ethylene dichloride crackers, Soap manufacture, Furnace trays, mufflers, hangers
INCONEL 600UNS N06600 |
|
CLICK FOR RFQ. min. 58%Ni, 20~23%Cr, 8~10%Mo, max. 5%Fe, max. 1.0%Co, general application : gas turbine engine ducting, combustion liners and spray bars, heat shields, furnace hardware, chemical plant hardware, and special seawater applications
INCONEL 625UNS N06625 |
CLICK FOR RFQ. 30~35%Ni+Co, 19~23%Cr, min 39.5%Fe, max. 2.0%Co, general application : heat exchangers and process piping, furnace components, ammonia effluent coolers, carburizing fixtures and retorts
INCOLOY 800H/HTUNS N08810/11 |
CLICK FOR RFQ. 38~46%Ni+Co, 19.5~23.5%Cr, min 22%Fe, max. 2.0%Co, general application : pickling hooks and equipment, pickling-tank heater, phosphoric acid evaporators, chemical process equipment, tank trucks; propeller shafts, spent nuclear fuel element recovery
INCOLOY 825UNS N08825 |
||
|
We can offer other alloy grades as well. CLICK FOR RFQ |
||||